ACPL-072L データシートの表示（PDF） - Avago Technologies
部品番号
コンポーネント説明
メーカー
ACPL-072L Datasheet PDF : 11 Pages
| |||
8. CMH is the maximum common mode voltage slew rate that can be sustained while maintaining VO > 0.8 VDD2. CML is the maximum common
mode voltage slew rate that can be sustained while maintaining VO < 0.8 V. The common mode voltage slew rates apply to both rising and falling
common mode voltage edges.
9. Device considered a two-terminal device: pins 1, 2, 3, and 4 shorted together and pins 5, 6, 7, and 8 shorted together.
10. In accordance with UL1577, each ACPL-072L is proof tested by applying an insulation test voltage ≥ 4500 VRMS for 1 second (leakage detection
current limit, II-O ≤ 5 mA). Each ACPL-772L is proof tested by applying an insulation test voltage ≥ 4500 VRMS for 1 second (leakage detection current
limit, II-O ≤ 5 mA).
11. The Input-Output Momentary Withstand Voltage is a dielectric voltage rating that should not be interpreted as an input-output continuous
voltage rating. For the continuous voltage rating refers to your equipment level safety specification or Avago Technologies Application Note 1074
entitled “Optocoupler Input-Output Endurance Voltage.”
12. CI is the capacitance measured at pin 2 (VI).
31
29
27
25
23
21
19
Tplh
17
Tphl
15
-20
0
20
40
60
80 100
T A ( oC)
Figure 1. Typical propagation delays vs temperature
2.40
2.20
2.00
1.80
1.60
1.40
1.20
1.00
-20
PWD
0 20 40 60 80 100
T A ( o C)
Figure 2. Typical pulse width distortion vs temperature
12
11
10
9
8
7
6
Rise Time
5
Fall Time
4
-20
0
20
40
60
80 100
T A ( o C)
Figure 3. Typical rise and fall time vs temperature
6
5
PWD
4
3
2
1
0
15
25
35
45
55
C L (pF)
Figure 5. Typical pulse width distortion vs load capacitance
32
30
28
26
24
22
20
15
Tplh
Tphl
25
35
45
55
C L (pF)
Figure 4. Typical propagation delays vs load capacitance
Surface Mount SO-8 Product
1,000
Is (mA)
800
Ps (mW)
600
Standard 8-pin DIP Product
1000
800
Is (mA)
Ps (mW)
600
400
400
200
200
0
0 25 50 75 100 125 150 175
TA - Case Temperature - C
0
0 25 50 75 100 125 150 175
TA - Case Temperature - °C
Figure 6. Thermal derating curve, dependence of safety limiting value with
case temperature per IEC/EN/DIN EN 60747-5-2
9
Share Link: 