ACPM-5011-TR1 データシートの表示（PDF） - Avago Technologies

部品番号

コンポーネント説明

メーカー

ACPM-5011-TR1

UMTS/LTE Band11 + Band21 (1427.9 - 1462.9 MHz) 3 x 3 mm Power Amplifier Module

Avago Technologies 

ACPM-5011

UMTS/LTE Band11 + Band21 (1427.9 - 1462.9 MHz)

3 x 3 mm Power Amplifier Module

Data Sheet

Description

The ACPM-5011 is a fully matched 10-pin surface mount

module developed for UMTS and LTE at Band11 and Band

21. This power amplifier module operates in the 1427.9-

1462.9 MHz bandwidth. The ACPM-5011 meets stringent

LTE (MPR = 0 dB) and HSPA+ linearity requirements up to

27.5 dBm output power. The 3 x 3 mm form factor package

is self contained, incorporating 50 ohm input and output

matching networks.

The ACPM-5011 features 5th generation of CoolPAM circuit

technology which supports 3 power modes – bypass, mid

and high power modes. The CoolPAM is stage bypass tech-

nology enhancing PAE (power added efficiency) at low

and medium power range. Active bypass feature is added

to 5th generation to enhance PAE further at low output

range. This helps to extend talk time.

A directional coupler is integrated into the module and

both coupling and isolation ports are available externally,

supporting daisy chain. The integrated coupler has

excellent coupler directivity, which minimizes the coupled

output power variation or delivered power variation

caused by the load mismatch from the antenna. The

coupler directivity, or the output power variation into

the mismatched load, is critical to the TRP and SAR per-

formance of the mobile phones in real field operations as

well as compliance tests for the system specifications.

The ACPM-5011 has integrated on-chip Vref and

on-module bias switch as the one of the key features of

the CoolPAM-5, so an external constant voltage source

is not required, eliminating the external LDO regulators

and switches from circuit boards of mobile devices. It also

makes the PA fully digital-controllable by the Ven pin that

simply turns the PA on and off from the digital control logic

input from baseband chipsets. All of the digital control

input pins such as the Ven, Vmode and Vbp are fully CMOS

compatible and can operate down to the 1.35 V logic. The

current consumption by digital control pins is negligible.

The power amplifier is manufactured on an advanced InGaP

HBT (hetero-junction Bipolar Transistor) MMIC (microwave

monolithic integrated circuit) technology offering state-of-

the-art reliability, temperature stability and ruggedness.

Features

• Thin Package (0.9 mm typ)

• Excellent Linearity

• 3-mode power control with Vbp and Vmode

• Bypass / Mid Power Mode / High Power Mode

• High Efficiency at max output power

• 10-pin surface mounting package

• Internal 50 ohm matching networks for both RF input

and output

• Integrated coupler

• Coupler and Isolation ports for daisy chain

• Green – Lead-free and RoHS complian

Applications

• UMTS(HSPA+)/LTE Handset for Band11 and Band 21

Ordering Information

Part Number

ACPM-5011-TR1

ACPM-5011-BLK

Number of

Devices

1000

100

Container

178 mm (7”) Tape/Reel

Bulk

Share Link: