AD7415ARTZ-1REEL データシートの表示（PDF） - Analog Devices

部品番号

コンポーネント説明

メーカー

AD7415ARTZ-1REEL

±0.5°C Accurate, 10-Bit Digital Temperature Sensors in SOT-23

Analog Devices 

AD7414/AD7415

ABSOLUTE MAXIMUM RATINGS

Table 2.

Parameter

Rating

VDD to GND

SDA Input Voltage to GND

−0.3 V to +7 V

−0.3 V to +7 V

SDA Output Voltage to GND

SCL Input Voltage to GND

ALERT Output Voltage to GND

Operating Temperature Range

Storage Temperature Range

Junction Temperature

−0.3 V to +7 V

−0.3 V to +7 V

−0.3 V to +7 V

−40°C to +125°C

−65°C to +150°C

150°C

5-Lead SOT-23 (RJ-5)

Power Dissipation1, 2

Thermal Impedance3

θJA, Junction-to-Ambient

(still air)

6-Lead SOT-23 (RJ-6)

Power Dissipation1, 2

Thermal Impedance3

θJA, Junction-to-Ambient

(still air)

8-Lead MSOP (RM-8)

Power Dissipation1, 2

Thermal Impedance3

WMAX = (TJMAX − TA)/θJA

240°C/W

WMAX = (TJMAX − TA)/θJA

190.4°C/W

WMAX = (TJMAX − TA)/θJA

θJA, Junction-to-Ambient

(still air)

205.9°C/W

θJC, Junction-to-Case

IR Reflow Soldering

Peak Temperature

Time at Peak Temperature

Ramp-up Rate

Ramp-down Rate

43.74°C/W

220°C (0°C/5°C)

10 sec to 20 sec

3°C/s max

−6°C/s max

Ramp from 25°C to Peak

Temperature

IR Reflow Soldering in Pb-Free

Package

Peak Temperature

Time at Peak Temperature

6 minutes max

260°C (0°C)

20 sec to 40 sec

Ramp Rate

3°C/s max

Ramp-Down Rate

−6°C/s max

Ramp from 25°C to Peak

Temperature

8 minutes max

1 Values relate to package being used on a standard 2-layer PCB.

2 TA = ambient temperature.

3 Junction-to-case resistance is applicable to components featuring a

preferential flow direction, such as components mounted on a heat sink.

Junction-to-ambient resistance is more useful for air-cooled, PCB-mounted

components.

Stresses above those listed under Absolute Maximum Ratings

may cause permanent damage to the device. This is a stress

rating only; functional operation of the device at these or any

other conditions above those indicated in the operational

section of this specification is not implied. Exposure to absolute

maximum rating conditions for extended periods may affect

device reliability.

ESD CAUTION

ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on the

human body and test equipment and can discharge without detection. Although this product features

proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy

electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance

degradation or loss of functionality.

Rev. E | Page 5 of 20

Share Link: