TP2424 データシートの表示（PDF） - Supertex Inc
部品番号
コンポーネント説明
メーカー
TP2424 Datasheet PDF : 2 Pages
| |||
TP2424
Low Threshold
P-Channel Enhancement-Mode
Vertical DMOS FETs
Ordering Information
BVDSS /
BVDGS
-240V
RDS(ON)
(max)
8.0Ω
VGS(th)
(max)
-2.4V
ID(ON)
(min)
-800mA
* Same as SOT-89. Product supplied on 2000 piece carrier tape reels.
Features
❏ Low threshold
❏ High input impedance
❏ Low input capacitance
❏ Fast switching speeds
❏ Free from secondary breakdown
❏ Low input and output leakage
❏ Complementary N- and P-channel devices
Applications
❏ Logic level interfaces – ideal for TTL and CMOS
❏ Solid state relays
❏ Linear Amplifiers
❏ Power Management
❏ Analog switches
❏ Telecom switches
Order Number / Package
TO-243AA*
Die
TP2424N8
TP2424ND
Product marking for TO-243AA:
TP4C❋
where ❋ = 2-week alpha date code
Low Threshold DMOS Technology
These low threshold enhancement-mode (normally-off) power
transistors utilize a vertical DMOS structure and Supertex's well-
proven silicon-gate manufacturing process. This combination
produces devices with the power handling capabilities of bipolar
transistors and with the high input impedance and positive
temperature coefficient inherent in MOS devices. Characteristic
of all MOS structures, these devices are free from thermal
runaway and thermally induced secondary breakdown.
Supertex’s vertical DMOS FETs are ideally suited to a wide range
of switching and amplifying applications where very low threshold
voltage, high breakdown voltage, high input impedance, low input
capacitance, and fast switching speeds are desired.
Package Option
Absolute Maximum Ratings
Drain-to-Source Voltage
BVDSS
Drain-to-Gate Voltage
BVDGS
Gate-to-Source Voltage
± 20V
Operating and Storage Temperature
-55°C to +150°C
Soldering Temperature*
300°C
* Distance of 1.6 mm from case for 10 seconds.
D
G
D
S
TO-243AA
(SOT-89)
Note: See Package Outline section for dimensions.
11/12/01
Supertex Inc. does not recommend the use of its products in life support applications and will not knowingly sell its products for use in such applications unless it receives an adequate "products liability
indemnification insurance agreement." Supertex does not assume responsibility for use of devices described and limits its liability to the replacement of devices determined to be defective due to
workmanship. No responsibility is assumed for possible omissions or inaccuracies. Circuitry and specifications are subject to change without notice. For the latest product specifications, refer to the
Supertex website: http://www.supertex.com. For complete liability information on all Supertex prod1ucts, refer to the most current databook or to the Legal/Disclaimer page on the Supertex website.
Share Link: 