AD9139(Rev0) データシートの表示（PDF） - Analog Devices

部品番号

コンポーネント説明

メーカー

AD9139
(Rev.:Rev0)

16-Bit, 1600 MSPS, TxDAC+ Digital-to-Analog Converter

Analog Devices 

Data Sheet

ABSOLUTE MAXIMUM RATINGS

Table 6.

Parameter

AVDD33 to GND

DVDD18, CVDD18 to GND

FSADJ, VREF, DACOUTP/DACOUTN, to

GND

D15P to D0P/D15N to D0N,

FRAMEP/FRAMEN, DCIP/DCIN to

GND

DACCLKP/DACCLKN,

REFP/SYNCP/REFN/SYNCN to GND

RESET, IRQ1, IRQ2, CS, SCLK, SDIO

to GND

Junction Temperature

Storage Temperature Range

Rating

−0.3 V to +3.6 V

−0.3 V to +2.1 V

−0.3 V to AVDD33 + 0.3 V

−0.3 V to DVDD18 + 0.3 V

−0.3 V to CVDD18 + 0.3 V

−0.3 V to DVDD18 + 0.3 V

125°C

−65°C to +150°C

Stresses above those listed under Absolute Maximum Ratings

may cause permanent damage to the device. This is a stress

rating only; functional operation of the device at these or any

other conditions above those indicated in the operational

section of this specification is not implied. Exposure to absolute

maximum rating conditions for extended periods may affect

device reliability.

AD9139

THERMAL RESISTANCE

The exposed pad (EPAD) must be soldered to the ground plane

(AVSS) for the 72-lead LFCSP. The EPAD provides an electrical,

thermal, and mechanical connection to the board.

Typical θJA, θJB, and θJC values are specified for a 4-layer board in

still air. Airflow increases heat dissipation, effectively reducing

θJA and θJB.

Table 7. Thermal Resistance

Package

θJA

θJB

θJC

72-Lead LFCSP 20.7 10.9 1.1

Unit Conditions

°C/W EPAD soldered

to ground plane

ESD CAUTION

Rev. 0 | Page 7 of 56

Share Link: