ADG659(RevA) データシートの表示（PDF） - Analog Devices
部品番号
コンポーネント説明
メーカー
ADG659 Datasheet PDF : 20 Pages
| |||
ABSOLUTE MAXIMUM RATINGS
TA = 25°C, unless otherwise noted.
Table 4.
Parameters
VDD to VSS
VDD to GND
VSS to GND
Analog Inputs1
Digital Inputs1
Peak Current, S or D
(Pulsed at 1 ms, 10% duty cycle max)
Continuous Current, S or D
Operating Temperature Range
Automotive (Y Version)
Industrial (B Version)
Storage Temperature Range
Junction Temperature
θJA Thermal Impedance, 16-Lead
QSOP
θJA Thermal Impedance, 16-Lead
TSSOP
θJA Thermal Impedance (4-Layer
Board),
16-Lead LFCSP
Lead Temperature, Soldering
Vapor Phase (60 sec)
Infrared (15 sec)
ESD
Ratings
13 V
−0.3 V to +13 V
+0.3 V to −6.5 V
VSS −0.3 V to VDD +0.3 V
GND −0.3 V to VDD +0.3
V or 10 mA, whichever
occurs first
40 mA
20 mA
−40°C to +125°C
−40°C to +85°C
−65°C to +150°C
150°C
104°C/W
150.4°C/W
70°C/W
215°C
220°C
5.5 kV
1 Over voltages at AX, EN, S, or D are clamped by internal diodes. Current
should be limited to the maximum ratings.
ADG658/ADG659
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
ESD CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on
the human body and test equipment and can discharge without detection. Although this product features
proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy
electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance
degradation or loss of functionality.
Rev. A | Page 9 of 20
Share Link: 