ADMC330 データシートの表示（PDF） - Analog Devices

部品番号

コンポーネント説明

メーカー

ADMC330

Single Chip DSP Motor Controller

Analog Devices 

ABSOLUTE MAXIMUM RATINGS*

Supply Voltage (VDD) . . . . . . . . . . . . . . . . . . –0.3 V to +7.0 V

Digital Input Voltage . . . . . . . . . . . . . . . . . . . . . –0.3 V to VDD

Analog Input Voltage . . . . . . . . . . . . . . . . . . . . . –0.3 V to VDD

Analog Reference Input Voltage . . . . . . . . . . . . –0.3 V to VDD

Digital Output Voltage Swing . . . . . . . . . . . . . . –0.3 V to VDD

Analog Reference Output Swing . . . . . . . . . . . . –0.3 V to VDD

Operating Temperature . . . . . . . . . . . . . . . . . –40°C to +85°C

Lead Temperature (Soldering, 10 sec) . . . . . . . . . . . . +280°C

*Stresses greater than those listed above may cause permanent damage to the

device. These are stress ratings only; functional operation of the device at these or

any other conditions greater than those indicated in the operational sections of this

specification is not implied. Exposure to absolute maximum rating conditions for

extended periods may affect device reliability.

ADMC330

Model

Temperature

Range

ADMC330BST –40°C to +85°C

ORDERING GUIDE

Instruction

Rate

20 MHz

Package

Description

80-Lead Plastic Thin Quad Flatpack (TQFP)

Package

Option

ST-80

CAUTION

ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily

accumulate on the human body and test equipment and can discharge without detection.

Although the ADMC330 features proprietary ESD protection circuitry, permanent damage may

occur on devices subjected to high energy electrostatic discharges. Therefore, proper ESD

precautions are recommended to avoid performance degradation or loss of functionality.

WARNING!

ESD SENSITIVE DEVICE

REV. 0

–3–

Share Link: