ADN2871ACPZ-RL(2005) データシートの表示（PDF） - Analog Devices

部品番号

コンポーネント説明

メーカー

ADN2871ACPZ-RL
(Rev.:2005)

3.3 V, 50 Mbps to 4.25 Gbps, Single-Loop, Laser Diode Driver

Analog Devices 

ADN2871

ABSOLUTE MAXIMUM RATINGS

Table 3.

Parameter

VCC to GND

IMODN, IMODP

All Other Pins

Junction Temperature

Rating

4. 2 V

−0.3 V to +4.8 V

−0.3 to 3.9 V

150°C

TEMPERATURE SPECIFICATIONS

Table 4.

Parameter

Rating

Operating Temperature Range

Industrial

−40°C to +85°C

Storage Temperature Range

–65°C to +150°C

Junction Temperature (TJ max)

125°C

LFCSP

Power Dissipation1

(TJ max − TA)/θJA W

θJA Thermal Impedance2

30°C/W

θJCThermal Impedance

29.5°C/W

Lead Temperature (Soldering 10 sec) 300°C

1 Power consumption equations are provided in the Power Consumption

section.

2 θJA is defined when part is soldered on a 4-layer board.

Stresses above those listed under Absolute Maximum Ratings

may cause permanent damage to the device. This is a stress

rating only; functional operation of the device at these or any

other conditions above those listed in the operational sections

of this specification is not implied. Exposure to absolute

maximum rating conditions for extended periods may affect

device reliability.

ESD CAUTION

ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on

the human body and test equipment and can discharge without detection. Although this product features

proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy

electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance

degradation or loss of functionality.

Rev. 0 | Page 6 of 20

Share Link: