ADN2892 データシートの表示（PDF） - Analog Devices
部品番号
コンポーネント説明
メーカー
ADN2892 Datasheet PDF : 16 Pages
| |||
Data Sheet
3.3 V, 4.25 Gbps,
Limiting Amplifier
ADN2892
FEATURES
GENERAL DESCRIPTION
Input sensitivity: 3.5 mV p-p
70 ps rise/fall times
CML outputs: 750 mV p-p differential
Bandwidth selectable for multirate 1×/2×/4× FC modules
Optional LOS output inversion
Programmable LOS detector: 3.5 mV to 35 mV
Rx signal strength indicator (RSSI)
SFF-8472-compliant average power measurement
Single-supply operation: 3.3 V
Low power dissipation: 160 mW
Available in space-saving, 3 mm × 3 mm, 16-lead LFCSP
Extended temperature range: −40°C to +95°C
SFP reference design available
APPLICATIONS
The ADN2892 is a 4.25 Gbps limiting amplifier with integrated
loss of signal (LOS) detection circuitry and a received signal
strength indicator (RSSI). This part is optimized for Fibre
Channel (FC) and Gigabit Ethernet (GbE) optoelectronic
conversion applications. The ADN2892 has a differential input
sensitivity of 3.5 mV p-p and accepts up to a 2.0 V p-p
differential input overload voltage. The ADN2892 has current
mode logic (CML) outputs with controlled rise and fall times.
The ADN2892 has a selectable low-pass filter with a −3 dB
cutoff frequency of 1.5 GHz. By setting BW_SEL to Logic 0, the
filter can limit the relaxation oscillation of a low cost CD laser
used in a legacy 1 Gbps FC transmitter. The limited BW also
reduces the rms noise and in turn improves the receiver optical
sensitivity for a lower data rate application, such as 1× FC and
GbE.
1×, 2×, and 4× FC transceivers
SFP/SFF/GBIC optical transceivers
GbE transceivers
Backplane receivers
By monitoring the bias current through a photodiode, the on-
chip RSSI detector measures the average power received with
2% typical linearity over the entire valid input range of the
photodiode. The on-chip RSSI detector facilitates SFF-8472-
compliant optical transceivers by eliminating the need for
external RSSI detector circuitry.
Additional features include a programmable loss-of-signal
(LOS) detector and output squelch. The ADN2892 is available
in a 3 mm × 3 mm, 16-lead LFCSP.
FUNCTIONAL BLOCK DIAGRAM
AVCC AVEE
BW_SEL SQUELCH DRVCC DRVEE
ADN2892
PIN
ADN2882
NIN
LPF
50Ω 50Ω
PD_VCC
PD_CATHODE
3.5kΩ
VREF
RSSI/LOS
DETECTOR
50Ω
50Ω
OUTP
OUTN
V+
LOS
RSSI_OUT
10kΩ
ADuC7020
THRADJ
LOS_INV
Figure 1. RSSI Function Capable—Applications Setup Block Diagram
Rev. C
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 ©2005–2017 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com
Share Link: 