ADP3304 データシートの表示（PDF） - Analog Devices
部品番号
コンポーネント説明
メーカー
ADP3304 Datasheet PDF : 8 Pages
| |||
ADP3301
ABSOLUTE MAXIMUM RATINGS*
Input Supply Voltage . . . . . . . . . . . . . . . . . . . –0.3 V to +16 V
Shutdown Input Voltage . . . . . . . . . . . . . . . . –0.3 V to +16 V
Error Flag Output Voltage . . . . . . . . . . . . . . . –0.3 V to +16 V
Noise Bypass Pin Voltage . . . . . . . . . . . . . . . . –0.3 V to +5 V
Power Dissipation . . . . . . . . . . . . . . . . . . . Internally Limited
Operating Ambient Temperature Range . . . –55°C to +125°C
Operating Junction Temperature Range . . . –55°C to +125°C
θJA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96°C/W
θJC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55°C/W
Storage Temperature Range . . . . . . . . . . . . –65°C to +150°C
Lead Temperature Range (Soldering 10 sec) . . . . . . . . +300°C
Vapor Phase (60 sec) . . . . . . . . . . . . . . . . . . . . . . . . +215°C
Infrared (15 sec) . . . . . . . . . . . . . . . . . . . . . . . . . . . +220°C
*This is a stress rating only; functional operation of the device at these or any other
conditions above those indicated in the operation section of this specification is not
implied. Exposure to absolute maximum rating conditions for extended periods
may affect device reliability.
Pin
1&2
3
4
5
6
7&8
PIN FUNCTION DESCRIPTIONS
Mnemonic Function
OUT
NR
GND
SD
ERR
IN
Output of the Regulator, fixed 2.7, 3.0,
3.2, 3.3 or 5 volts output voltage. By-
pass to ground with a 0.47 µF or larger
capacitor. Pins 1 and 2 must be con-
nected together for proper operation.
Noise Reduction Pin. Used for further
reduction of the output noise. (See text
for details.) No connection if not used.
Ground Pin.
Active Low Shutdown Pin. Connect to
ground to disable the regulator output.
When shutdown is not used, this pin
should be connected to the input pin.
Open Collector Output which goes low
to indicate that the output is about to
go out of regulation.
Regulator Input. Pins 7 and 8 must
be connected together for proper
operation.
PIN CONFIGURATION
Other Members of anyCAP™* Family1
Model
Output Package
Current Option2
Comments
ADP3300 50 mA SOT-23
High Accuracy
OUT 1
8 IN
OUT 2 ADP3301 7 IN
NR 3
TOP VIEW
(Not to Scale)
6 ERR
GND 4
5 SD
PIN FOR 5V DEVICE
ADP3303 200 mA SO-8
High Accuracy
NOTES
1See individual data sheets for detailed ordering information.
2SO = Small Outline, SOT = Surface Mount.
CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily
accumulate on the human body and test equipment and can discharge without detection.
Although the ADP3301 features proprietary ESD protection circuitry, permanent damage may
occur on devices subjected to high energy electrostatic discharges. Therefore, proper ESD
precautions are recommended to avoid performance degradation or loss of functionality.
WARNING!
ESD SENSITIVE DEVICE
REV. A
–3–
Share Link: 