ADP3330
PIN CONFIGURATION AND FUNCTION DESCRIPTIONS
Data Sheet
OUT 1
6 SD
ADP3330
IN 2 TOP VIEW 5 NR
(Not to Scale)
ERR 3
4 GND
Figure 3. Pin Configuration
Table 4. Pin Function Descriptions
Pin No. Mnemonic Description
1
OUT
Output of the Regulator. Bypass to ground with a 0.47 µF or larger capacitor.
2
IN
Regulator Input.
3
ERR
Open Collector Output. This pin goes low to indicate that the output is about to go out of regulation.
4
GND
Ground Pin.
5
NR
Noise Reduction Pin. This pin is used for further reduction of output noise (see the Applications Information
section). Do not connect if this pin is not used.
6
SD
Active Low Shutdown Pin. Connect to ground to disable the regulator output. When shutdown is not used, this
pin must be connected to the input pin.
Rev. C | Page 6 of 16