ADT7463 データシートの表示（PDF） - ON Semiconductor

部品番号

コンポーネント説明

メーカー

ADT7463

dBCOOL™ Remote Thermal Controller and Voltage Monitor

ON Semiconductor 

ADT7463

FRONT

CHASSIS

FAN

REAR

CHASSIS

FAN

AMBIENT

TEMPERATURE

ADT7463

TACH2

PWM1

TACH1

PWM3

TACH3

D1+

D1–

VID[0:4]/VID[0:5]

D2+

D2–

THERM

5(VRM9)/6(VRM10)

PROCHOT

ADP316x

VRM

CONTROLLER

VCOMP

3.3VSB

5V

12V/VID5

CURRENT

SDA

SCL

SMBALERT

VCORE

GND

Figure 2. Recommended Implementation

RECOMMENDED IMPLEMENTATION

Configuring the ADT7463 as in Figure 2 allows the systems

designer the following features:

• Six VID inputs (VID0 to VID5) for VRM10 support.

• Two PWM outputs for fan control of up to three fans

(the front and rear chassis fans are connected in parallel).

• Three TACH fan speed measurement inputs.

• VCC measured internally through Pin 4.

• CPU core voltage measurement (VCORE).

• 2.5 V measurement input used to monitor CPU current

(connected to VCOMP output of ADP316x VRM controller).

This is used to determine CPU power consumption.

• 5 V measurement input.

• VRM temperature uses local temperature sensor.

• CPU temperature measured using Remote 1 temperature

channel.

• Ambient temperature measured through Remote 2 temperature

channel.

• If not using VID5, this pin can be reconfigured as the 12 V

monitoring input.

• Bidirectional THERM pin. Allows Intel Pentium 4 PROCHOT

monitoring and can function as an overtemperature THERM

output.

• SMBALERT system interrupt output.

See the AN-612 ADT7463 Configuration application note for more

information and register settings for all possible configurations

(www.analog.com/UploadedFiles/Application_Notes/408599520AN612_0.pdf).

Rev. 4 | Page 8 of 52 | www.onsemi.com

–8–

REV. C

Share Link: