ADXL206(Rev0) データシートの表示（PDF） - Analog Devices
部品番号
コンポーネント説明
メーカー
ADXL206 Datasheet PDF : 12 Pages
| |||
ADXL206
ABSOLUTE MAXIMUM RATINGS
Table 2.
Parameter
Acceleration (Any Axis)
Unpowered
Powered
VS
All Other Pins
Output Short-Circuit Duration
(Any Pin to Common)
Ambient Operating Temperature
Range (TA)
Storage Temperature Range
Rating
500 g
500 g
−0.3 V to +7.0 V
(COM − 0.3 V) to
(VS + 0.3 V)
Indefinite
−55°C to +175°C
−65°C to +200°C
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
THERMAL RESISTANCE
θJA is specified for the worst-case conditions, that is, for a device
soldered in a printed circuit board (PCB) for surface-mount
packages.
Table 3. Thermal Resistance
Package Type
θJA
θJC
8-Lead SBDIP
120
20
Unit
°C/W
ESD CAUTION
TP
TL
TSMAX
TSMIN
tP
RAMP-UP
CRITICAL ZONE
TL TO TP
tL
tS
PREHEAT
RAMP-DOWN
TIME 25°C TO PEAK
TIME
Figure 2. Recommended Soldering Profile
Table 4. Recommended Soldering Profile Limits
Profile Feature
Average Ramp Rate (TL to TP)
Preheat
Minimum Temperature (TSMIN)
Maximum Temperature (TSMAX)
Time (TSMIN to TSMAX), tS
Ramp-Up Rate (TSMAX to TL)
Time Maintained Above Liquidous (tL)
Liquidous Temperature (TL)
Peak Temperature (TP)
Time Within 5°C of Actual Peak Temperature (tP)
Ramp-Down Rate (TP to TL)
Time 25°C to Peak Temperature
Sn63/Pb37
3°C/sec max
100°C
150°C
60 sec to 120 sec
3°C/sec max
60 sec to 150 sec
183°C
240°C + 0°C/−5°C
10 sec to 30 sec
6°C/sec max
6 minutes max
Pb-Free
3°C/sec max
150°C
200°C
60 sec to 150 sec
3°C/sec max
60 sec to 150 sec
217°C
260°C + 0°C/−5°C
20 sec to 40 sec
6°C/sec max
8 minutes max
Rev. 0 | Page 4 of 12
Share Link: 