AM27X64-120JC データシートの表示（PDF） - Advanced Micro Devices
部品番号
コンポーネント説明
メーカー
AM27X64-120JC Datasheet PDF : 10 Pages
| |||
AC CHARACTERISTICS
Parameter Symbols
Am27X64
JEDEC Standard
Description
Test Setup -55 -70 -90 -120 -150 -200 -255 Unit
tAVQV
tACC Address to Output Delay
CE#,
OE# = VIL
Max
55
70
90 120 150 200 250
ns
tELQV
tCE Chip Enable to Output Delay OE# = VIL Max 55 70 90 120 150 200 250 ns
tGLQV
tOE Output Enable to Output Delay CE# = VIL Max 35 40 40 50 50 50 50 ns
tEHQZ
tGHQZ
tDF
(Note 2)
Chip Enable High or Output
Enable High to Output High Z,
Whichever Occurs First
Max 25 25 25 30 30 30 30 ns
tAXQX
Output Hold Time from
tOH Addresses, CE# or OE#,
Whichever Occurs First
Min 0 0 0 0 0 0 0 ns
Caution: Do not remove the device from (or insert it into) a socket or board that has VPP or VCC applied.
Notes:
1. VCC must be applied simultaneously or before VPP, and removed simultaneously or after VPP.
2. This parameter is sampled and not 100% tested.
3. Switching characteristics are over operating range, unless otherwise specified.
4. See Figure 3 and Table 1 for test specifications.
SWITCHING WAVEFORMS
2.4
Addresses
0.45
2.0
0.8
Addresses Valid
2.0
0.8
CE#
tCE
OE#
Output
High Z
tOE
tACC
(Note 1)
tOH
Valid Output
tDF (Note 2)
High Z
12084F-9
Notes:
1. OE# may be delayed up to tACC – tOE after the falling edge of the addresses without impact on tACC.
2. tDF is specified from OE# or CE#, whichever occurs first.
PACKAGE CAPACITANCE
Parameter Symbol Parameter Description Test Conditions
CIN
Input Capacitance
VIN = 0
COUT
Output Capacitance
VOUT = 0
Notes:
1. This parameter is only sampled and not 100% tested.
2. TA = +25°C, f = 1 MHz.
PD 028
PL 032
Typ Max Typ Max Unit
5
10
10
12
pF
8
10
11
14
pF
8
Am27X64
Share Link: 