WSF512K32-XXX
FIG. 8
WRITE/ERASE/PROGRAM OPERATION, FLASH MEMORY FWE CONTROLLED
NOTES:
1. PA is the address of the memory location
to be programmed.
2. PD is the data to be programmed at byte address.
3. D7 is the output of the complement of the
data written to the device.
4. DOUT is the output of the data written to
the device.
5. Figure indicates last two bus cycles of four bus
cycle sequence.
6. SCS = VIH
9
White Electronic Designs Corporation • (602) 437-1520 • www.whiteedc.com