DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

AN6291 データシートの表示(PDF) - Panasonic Corporation

部品番号
コンポーネント説明
メーカー
AN6291 Datasheet PDF : 7 Pages
1 2 3 4 5 6 7
ICs for Cassette, Cassette Deck
s Effect of dbxII Noise Reduction System
(Without noise reduction system)
+20dB
0dB
Fortissimo
+10dB
Magnetron saturation level Distortes
+10dB
Recording
Playback
– 80dB
Pianissimo
– 60dB
– 60dB
Z-
Noise level
Noise
(When dbx II System is ON)
+20dB
0dB
FortissDimecorease
+10dB
Compressed to
1/2 by dB
Increase
Fortissimo
+20dB
Expanded to
2 times by dB
– 80dB
– 40dB
PianissiImncorease
Fortissimo is decreased less
than saturation level and
pianissimo is increased
more than noise level. Thus
they are recorded.
DNeocirsePeailsaeenv–iesls8i0mdoB
D range is expanded in equal
value as fortissimo is
increased and pianissimo is
decreased its level, and they
are playbacked.
Noise
AN6291, AN6291S
Fortissimo (large sound)
distortes due to magnetron
saturation
Even if input width is
100dB, width 60-70dB is
playbacked in output.
Pianissimo (small sound)
is erased by the hysnoise
of tape
Large sound is playbacked
without distortion
100dB of input range
is playbacked as well
Small sound is playbacked, too.
Noise level is decreased more
than by 30dB at the playback
mode (Improvement of S/N
ratio)
s Cautions
(1) When users use the AN6291 and the AN6291S, contract should be made between the dbx Technology Licensing. dbx
licence and trademark should be contacted with the following.
the U.S.A. : dbx Technology Licensing
JAPAN Office : dbx Technology Licensing
433 California Street, Third Floor
San Francisco, California 94104
Tel : 415-765-2801
Tel : 03-3378-0915
Fax : 03-3374-5191
Fax : 415-765-2141
(2) Capacitor between the Pin6 – 7 and Pin16 –17 is used to cut DC current.
When leakage of DC current is large, encode and decode characteristics is not right value, capacitor's leakage should be as
minimum as possible.
(3) The AN6291 is a low power consumption current type. So effection of wiring resistance is small and oscillation character-ist
of pattern location is good, however, when impedance of the input pin is high, wiring should be shorter because it is easily
effected by external noises.

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]