AN8032 データシートの表示（PDF） - Panasonic Corporation

部品番号

コンポーネント説明

メーカー

AN8032

Active filter control IC

Panasonic Corporation 

Voltage Regulators

AN8032

s Application Notes (continued)

[2] Operation descriptions (continued)

1. Normal control (continued)

2) Control outline description (Refer to figure 2 and figure 3.)

(1) Input voltage (EIN) detection

The voltage which is divided from the input voltage of chopper circuit (EIN) by using the external

resistor is input to the multiplier input terminal of the AN8032 (MPI terminal).

(2) Output voltage (EOUT) detection

The voltage which is divided from the output voltage of chopper circuit (EOUT) by using the external

resistor is amplified by the error amplifier of the AN8032 (Input to noninverting input terminal (EI

terminal)) and input to another multiplier input (EO terminal, which also functions as output for error

amplifier).

(3) Multiplication of input voltage and output voltage

The signals input to the multiplier are multiplied and outputted from the multiplier. This output is a

signal which monitors both the input voltage and output voltage of the chopper circuit.

MPI

input voltage

0V

EI

input voltage

0V

Approx. 2.5 V typ.

Time

Time

Multiplier output

(MPO) voltage

0V

Enlarged

Time

0V

Transformer reset

voltage detection (VB)

0V

Power MOS turned off

Power MOS turned off

Multiplier output (MPO) voltage

Power MOSFET current detection

(CS) voltage

Time

VB lower limit voltage (regulated inside IC)

Power MOS turned on = bias coil voltage

generated

Reset operation of transformer = bias coil

voltage inversion

VB lower limit voltage (regulated inside IC)

Time

Figure 2. Explanation of normal control operation

7

Share Link: