24LCS61/62
5.2 Clear Address Command
The clear address command will clear the device ID
byte from all devices on the bus and will enable all
devices to respond to the Assign Address command.
The master must end the command by sending an ack
after 8 don’t care bits have been transmitted, followed
by a Stop bit. Sending the Stop bit in any other position
of the command will result in the command aborting
and the device releasing the bus.
FIGURE 5-2:
CLEAR ADDRESS COMMAND
S
T
A CONTROL
R
BYTE
T
S
T
Device ID Byte O
P
S
0
1
1
0
O
E
1
1
0
XXXXXXXX
P
A
A
C
C
K
K
DS21226A-page 8
Preliminary
© 1997 Microchip Technology Inc.