24LCS61 データシートの表示（PDF） - Microchip Technology
部品番号
コンポーネント説明
メーカー
24LCS61 Datasheet PDF : 22 Pages
| |||
24LCS61/24LCS62
1.0 ELECTRICAL CHARACTERISTICS
Absolute Maximum Ratings(†)
VCC.............................................................................................................................................................................7.0V
All inputs and outputs w.r.t. VSS ......................................................................................................... -0.6V to VCC +1.0V
Storage temperature ...............................................................................................................................-65°C to +150°C
Ambient temperature with power applied ................................................................................................-65°C to +125°C
ESD protection on all pins ......................................................................................................................................................≥ 4 kV
† NOTICE: Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to
the device. This is a stress rating only and functional operation of the device at those or any other conditions
above those indicated in the operational listings of this specification is not implied. Exposure to maximum rating
conditions for extended periods may affect device reliability.
TABLE 1-1: DC CHARACTERISTICS
All parameters apply across the
specified operating ranges unless
otherwise noted.
VCC = +2.5V to +5.5V
Industrial (I): TA = -40°C to +85°C
Parameter
SCL and SDA pins:
High-level input voltage
Low-level input voltage
Hysteresis of Schmitt Trigger
inputs
Low-level output voltage
(SDA and EDS pins)
Input leakage current
Output leakage current
Pin capacitance (all inputs/outputs)
Operating current
Standby current
Symbol
VIH
VIL
VHYS
VOL
ILI
ILO
CIN,
COUT
ICC Write
ICC Read
ICCS
Min.
0.7 VCC
—
0.05 VCC
—
—
—
—
—
—
—
Max.
—
.3 VCC
—
.40
±1
±1
10
4
1
50
Note: This parameter is periodically sampled and not 100% tested.
Units
Conditions
V
V
V
V IOL = 12 mA, VCC = 4.5V
IOL = 8 mA, VCC = 2.5V
µA VIN = Vss or Vcc
µA VOUT = Vss or Vcc
pF VCC = 5.0V (Note)
TA = 25°C, f = 1 MHz
mA VCC = 5.5V
mA VCC = 5.5V, SCL = 400 kHz
µA VCC = 5.5V, SDA = SCL = VCC
EDS = VCC
DS21226E-page 2
2004 Microchip Technology Inc.
Share Link: 