APW7136A(2010) データシートの表示（PDF） - Anpec Electronics
部品番号
コンポーネント説明
メーカー
APW7136A Datasheet PDF : 17 Pages
| |||
APW7136A/B/C
Ordering and Marking Information
APW7136
Assembly Material
Handling Code
Temperature Range
Package Code
OVP Voltage Code
OVP Voltage Code
A: 20V B: 28V C: 35V
Package Code
C : SOT-23-6
Operating Ambient Temperature Range
I : -40 to 85oC
Handling Code
TR : Tape & Reel
Assembly Material
G : Halogen and Lead Free Device
APW7136YCI :
CFYX
Y - OVP Voltage Code
X - Date Code
Note: ANPEC lead-free products contain molding compounds/die attach materials and 100% matte tin plate termination finish; which
are fully compliant with RoHS. ANPEC lead-free products meet or exceed the lead-free requirements of IPC/JEDEC J-STD-020D for
MSL classification at lead-free peak reflow temperature. ANPEC defines “Green” to mean lead-free (RoHS compliant) and halogen
free (Br or Cl does not exceed 900ppm by weight in homogeneous material and total of Br and Cl does not exceed 1500ppm by
weight).
Absolute Maximum Ratings (Note 1)
Symbol
Parameter
Rating
Unit
VIN
VIN Supply Voltage (VIN to GND)
-0.3 ~ 8
V
FB, EN to GND Voltage
-0.3 ~ VIN
V
VLX LX to GND Voltage
-0.3 ~ 38
V
VOVP
TJ
TSTG
TSDR
OVP to GND Voltage
Maximum Junction Temperature
Storage Temperature Range
Maximum Lead Soldering Temperature, 10 Seconds
-0.3 ~ 38
V
150
oC
-65 ~ 150
oC
260
oC
Note 1: Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are
stress ratings only and functional operation of the device at these or any other conditions beyond those indicated in the operational
sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device
reliability.
Thermal Characteristics
Symbol
θJA
Parameter
Junction to Ambient Thermal Resistance (Note 2)
SOT-23-6
Rating
250
Unit
°C/W
Note 2: θJA is measured with the component mounted on a high effective thermal conductivity test board in free air. The exposed pad
of package is soldered directly on the PCB.
Recommended Operating Conditions (Note 3)
Symbol
VIN
VOUT
CIN
COUT
L1
VIN Input Voltage
Converter Output Voltage
Input Capacitor
Output Capacitor
Inductor
Parameter
Range
Unit
2.7~ 6
V
Up to 32
V
4.7 or higher
µF
0.68 or higher
µF
6.8 to 47
µH
Copyright © ANPEC Electronics Corp.
2
Rev. A.4 - Dec., 2010
www.anpec.com.tw
Share Link: 