AS8202NF-ALQU データシートの表示（PDF） - austriamicrosystems AG
部品番号
コンポーネント説明
メーカー
AS8202NF-ALQU Datasheet PDF : 20 Pages
| |||
AS8202NF TTP-C2NF
Data Sheet - Electrical Characteristics
Table 4. Electrical Characteristics
Symbol
Parameter
Conditions
Min Typ
Outputs and TTL Bidirectional Pins in Output Mode
IOL
Output Low Current
VDD=3.0V, Vo = 0.4V
IOH
Output High Current
VDD=3.0V, Vo = 2.5V
IOZ
Output Tristate Current
VDD=3.6V
tRISE
t(VOUT=0.1*VDD) to
t(VOUT=0.9*VDD)
Transition Time – Rise
T = 125 ºC,
VDD=3.0V,
CLOAD=35pF
CTS[1,0],
LED[2:0],
INTB
D[15:0],
READYB
tFALL
t(VOUT=0.9*VDD) to
t(VOUT=0.1*VDD)
Transition Time – Fall
TxD Pins
T = 125 ºC,
VDD=3.0V,
CLOAD=35pF
CTS[1,0],
LED[2:0],
INTB
D[15:0],
READYB
tRISE
t(VOUT=0.3*VDD) to Transition Time – Rise TxD
t(VOUT=0.7*VDD)
T = 125 ºC,
VDD=3.0V,
CLOAD=35pF
TxD[1,0]
tFALL
t(VOUT=0.7*VDD) to Transition Time – Fall TxD
t(VOUT=0.3*VDD)
T = 125 ºC,
VDD=3.0V,
CLOAD=35pF
TxD[1,0]
tASYM_Rx
t(VOUT=0.5*VDD)
Asymmetric Driver Delay
TxD
T = 125 ºC,
VDD=3.0V,
CLOAD=35pF
TxD[1,0]
-34
1. Typical values: CLK0=40 MHz, CLK1=16 MHz
2. Using the internal PLL multiplies the main clock frequency by 4
3. Implicitly tested.
4. Guaranteed by design; not tested during production
Note: If Min/Max values are both negative, they are ordered according to their absolute value.
Max Units
-4
mA
4
mA
±104
µA
8.13
ns
8.93
63
ns
73
4.54
ns
34
ns
34
ns
www.austriamicrosystems.com and
TTTech Computertechnik AG
Revision 2.1
8 - 20
Share Link: 