AT88SC0104C データシートの表示（PDF） - Atmel Corporation
部品番号
コンポーネント説明
メーカー
AT88SC0104C Datasheet PDF : 20 Pages
| |||
3. *Absolute Maximum Ratings
Operating Temperature.............................−40°C to +85°C
Storage Temperature ............................−65°C to + 150°C
Voltage on Any Pin
with Respect to Ground .......................− 0.7 to VCC +0.7V
Maximum Operating Voltage.......................................6.0V
DC Output Current ..................................................5.0 mA
*NOTICE: Stresses beyond those listed under “Absolute
Maximum Ratings” may cause permanent
damage to the device. This is a stress rating
only and functional operation of the device at
these or any other condition beyond those
indicated in the operational sections of this
specification is not implied. Exposure to
absolute maximum rating conditions for
extended periods of time may affect device
reliability.
Table 2. DC Characteristics
Applicable over recommended operating range from VCC = +2.7 to 5.5V, TAC = -40°C to +85°C (unless otherwise noted)
Symbol
Parameter
VCC(2)
Supply Voltage
ICC
Supply Current (VCC = 5.5V)
ICC
Supply Current (VCC = 5.5V)
ICC
Supply Current (VCC = 5.5V)
ICC
Supply Current (VCC = 5.5V)
ISB
VIL(1)
VIL(1)
VIL(1)
VIH(1)(2)
VIH(1)(2)
VIH(1)(2)
Standby Current (VCC = 5.5V)
SDA/IO Input Low Threshold
SCL/CLK Input Low Threshold
RST Input Low Threshold
SDA/IO Input High Threshold
SCL/CLK Input High Threshold
RST Input High Threshold
IIL
SDA/IO Input Low Current
IIL
SCL/CLK Input Low Current
IIL
RST Input Low Current
IIH
SDA/IO Input High Current
IIH
SCL/CLK Input High Current
IIH
RST Input High Current
VOH
SDA/IO Output High Voltage
VOL
SDA/IO Output Low Voltage
IOH
SDA/IO Output High Current
Test Condition
Async READ at 3.57MHz
Async WRITE at 3.57MHz
Synch READ at 1MHz
Synch WRITE at 1MHz
VIN = VCC or GND
0 < VIL < VCC x 0.15
0 < VIL < VCC x 0.15
0 < VIL < VCC x 0.15
VCC x 0.7 < VIH < VCC
VCC x 0.7 < VIH < VCC
VCC x 0.7 < VIH < VCC
20K ohm external pull-up
IOL = 1mA
VOH
Min
2.7
0
0
0
VCC x 0.7
VCC x 0.7
VCC x 0.7
VCC x 0.7
0
Typ
Max
Units
5.5
V
5
mA
5
mA
5
mA
5
mA
100
mA
VCC x 0.2
V
VCC x 0.2
V
VCC x 0.2
V
VCC
V
VCC
V
VCC
V
15
μA
15
μA
50
μA
20
μA
100
μA
150
μA
VCC
V
VCC x 0.15
V
20
μA
Notes: 1. VIL min and VIH max are reference only and are not tested.
2. To prevent Latch Up Conditions from occurring during Power Up of the AT88SCxxxxC, VCC must be turned
on before applying VIH. For Powering Down, VIH must be removed before turning VCC off.
4 AT88SC0104C
2021KS–SMEM–10/09
Share Link: 