ATMEGA1284 データシートの表示（PDF） - Atmel Corporation

部品番号

コンポーネント説明

メーカー

ATMEGA1284

8-bit AVR Microcontroller with 16/32/64/128K Bytes In-System Programmable Flash

Atmel Corporation 

2.3.7 RESET

2.3.8 XTAL1

2.3.9 XTAL2

2.3.10 AVCC

2.3.11 AREF

164A/164PA/324A/324PA/644A/644PA/1284/1284P

Reset input. A low level on this pin for longer than the minimum pulse length will generate a

reset, even if the clock is not running. The minimum pulse length is given in ”System and Reset

Characteristics” on page 335. Shorter pulses are not guaranteed to generate a reset.

Input to the inverting Oscillator amplifier and input to the internal clock operating circuit.

Output from the inverting Oscillator amplifier.

AVCC is the supply voltage pin for Port A and the Analog-to-digital Converter. It should be exter-

nally connected to VCC, even if the ADC is not used. If the ADC is used, it should be connected

to VCC through a low-pass filter.

This is the analog reference pin for the Analog-to-digital Converter.

8

8272AS–AVR–01/10

Share Link: