Audio ICs
FApplication example
BA6154
The response time (attack and release time) can be
changed by varying the values of C1 and R1.
C2 is a coupling capacitor, and the potentiometer VR va-
ries the input level. Input a fixed voltage level and adjust
the potentiometer so that the LED lights at 0dB. To re-
duce the LED current, connect a resistor either in parallel
FExternal dimensions (Units: mm)
(Fig. 3 (1)) or in series (Fig. 3 (2)) with the LED. If a resist-
er is connected in series with the LED, the LED current
will change if the supply voltage fluctuates.
Note: If the power supply voltage exceeds 9V, insert a resistor in series with
the LED current supply line, or connect a heat sink so that the maxi-
mum power dissipation Pd Max. is not exceeded (see Fig. 4).
639