UG-260/U-CF データシートの表示（PDF） - DDK Ltd.

部品番号

コンポーネント説明

メーカー

UG-260/U-CF

BNC Style Connector

DDK Ltd. 

BNC　Series

○ Assembly Instruction（2）

Parts Configulration

Unit：mm

Boot

①

②

③

④

Boot

Ferule

Ferule

Center Conductor

Body

Center Conductor

Body

15mm

15mm

① Insert the boot, ferule into the cable and cut the

　　cable as fig.1.

●　Please be careful to not damage the outer

　　conductor.

13.3mm

6.6mm

10.6mm

13.3mm

6.6mm

② Cut the insulator and outer conductor as fig.2.

　　Pre-solder the center conductor and cut as fig.2.

●　When cutting the insulator, please be careful to not

10.6m　m　damage the center conductor.

③ Solder up the contact to the center conductor.

　 Spread the end of the outer conductor to insert the

body between insulator and outer conductor easily.

　 Please do not pick the outer conductor.

● Please be caredule to not be swelled up the solder.

Shave the excessed solder along the outside of the

contact.

● Please be careful to not deform the insulator by

soldering.

BA

Edge of CrimpBDiesA

Edge of Body

0.5〜1.0mm

④ Insert the body into the cable between insulator and

EdgeoouftCerrimcpoDniedsuctor until the top of the contact is on the

Edgseaomf Beopdylane with the top of the body and move the

0.5〜fe1r.0umlemto the body. Crimp the ferule at position A

and position B .

⑤

Boot

Boot

⑤ Cover the boot on the ferule.

◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice.

　Moreover, the characteristic and the specification of the published product are the reference values.

　Please confirm the content with the latest delivery specifications when you use the product.

http://www.ddknet.co.jp

10

Share Link: