BNX025H01B_ データシートの表示（PDF） - Murata Manufacturing

部品番号

コンポーネント説明

メーカー

BNX025H01B_

SMD/BLOCK Type EMI Suppression Filters

Murata Manufacturing 

Block Type EMIFILr Lead Type !Caution/Notice

!Caution

q Rating

Do not use products beyond the rated current and rated

voltage as this may create excessive heat and

deteriorate the insulation resistance.

Notice

q Storage and Operating Conditions

<Operating Environment>

1. Do not use products in a chemical atmosphere such

as chlorine gas, acid or sulfide gas.

2. Do not use products near water, oil or organic

solvents.

<Storage and Handling Requirements>

1. Storage Period

BNX Series should be used within 12 months.

Solderability should be checked if this period is

exceeded.

2. Storage Conditions

(1) Storage temperature: -10 to +40˚C

Relative humidity: 15 to 85%

Avoid sudden changes in temperature and humidity.

(2) Do not store products in a chemical atmosphere

such as chlorine gas, acid or sulfide gas.

q Notice (Soldering and Mounting)

1. Cleaning

Failure and degradation of a product are caused

by the cleaning method. When you clean in conditions

that are not in mounting information, please contact

Murata engineering.

2. Soldering

Reliability decreases with improper soldering

methods. Please solder by the standard soldering

conditions shown in mounting information.

3. Other

Noise suppression levels resulting from Murata's

EMI suppression filters "EMIFIL" may vary,

depending on the circuits and ICs used, type of

noise, mounting pattern, lead wire length, mounting

location, and other operating conditions. Be sure

to check and confirm in advance the noise

suppression effect of each filter, in actual

circuits, etc. before applying the filter in a

commercial-purpose equipment design.

!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

C31E.pdf

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.

Mar.28,2011

196

Share Link: