CT25-T データシートの表示（PDF） - LEM Industrial

部品番号

コンポーネント説明

メーカー

CT25-T

Current Transducer CT 5 .. 25-T

LEM Industrial 

Dimensions CT 5 .. 25-T (in mm. 1 mm = 0.0394 inch)

Front view

Left view

Connection

Top view

Mechanical characteristics

Remarks

• General tolerance

• Transducer fastening

• Connection of primary

• Connection of secondary

• Fastening torque

± 0.3 mm

2 holes M5 screws

2 steel screws M5

M5 threaded studs

M5 threaded studs

2.2 Nm or 1.62 Lb - Ft

• VOUT is positive when IP flows in the direction of the arrow.

• This transducer induces into the primary circuit a square

wave of 70 mV amplitude (frequency ≈ 220 Hz). This voltage

can induce an AC current in the primary if the primary

impedance is low.

• This is a standard model. For different versions (supply

voltages, turns ratios, unidirectional measurements...),

please contact us.

060927/0

LEM reserves the right to carry out modifications on its transducers, in order to improve them, without prior notice.

Page 3/3

www.lem.com

Share Link: