M59MR032C100ZC6T データシートの表示（PDF） - STMicroelectronics

部品番号

コンポーネント説明

メーカー

M59MR032C100ZC6T

32 Mbit (2Mb x16, Mux I/O, Dual Bank, Burst) 1.8V Supply Flash Memory

STMicroelectronics 

M59MR032C, M59MR032D

Table 23. Primary Algorithm-Specific Extended Query Table

Offset

Data

Description

(P)h = 39h

0050h

0052h Primary Algorithm extended Query table unique ASCII string “PRI”

0049h

(P+3)h = 3Ch 0031h Major version number, ASCII

(P+4)h = 3Dh 0030h Minor version number, ASCII

(P+5)h = 3Eh 00F2h Extended Query table contents for Primary Algorithm

(P+7)h

(P+8)h

0003h

0000h

0000h

bit 10-31

bit 0

bit 1

bit 2

bit 3

bit 4

bit 5

bit 6

bit 7

bit 8

bit 9

Reserved; undefined bits are ‘0’. If bit 31 is ’1’ then another 31 bit

field of optional features follows at the end of the bit-30 field.

Chip Erase supported

(1 = Yes, 0 = No)

Suspend Erase supported

(1 = Yes, 0 = No)

Suspend Program supported

(1 = Yes, 0 = No)

Legacy Lock/Unlock supported

(1 = Yes, 0 = No)

Queued Erase supported

(1 = Yes, 0 = No)

Instant individual block locking supported (1 = Yes, 0 = No)

Protection bits supported

(1 = Yes, 0 = No)

Page-mode read supported

(1 = Yes, 0 = No)

Synchronous read supported

(1 = Yes, 0 = No)

Simultaneous operation supported

(1 = Yes, 0 = No)

(P+9)h = 42h

0001h Supported Functions after Suspend

Read Array, Read Status Register and CFI Query

(P+A)h = 43h

(P+B)h

0003h

0000h

bit 0

Program supported after Erase Suspend (1 = Yes, 0 = No)

bit 7 to 1 Reserved; undefined bits are ‘0’

Block Protect Status

Defines which bits in the Block Protect Status Register section of the Query are

implemented.

(P+C)h = 45h

0018h

bit 0

bit 1

bit 15 to 2

Block Protect Status Register Protect/Unprotect bit active (1 = Yes,

0 = No)

Block Lock Status Register Lock-Down bit active (1 = Yes, 0 = No)

Reserved for future use; undefined bits are ‘0’

VDD Logic Supply Optimum Program/Erase voltage (highest performance)

(P+D)h = 46h

00C0h

bit 7 to 4 HEX value in volts

bit 3 to 0 BCD value in 100 mV

VPP Supply Optimum Program/Erase voltage

(P+E)h = 47h

0000h

bit 7 to 4

bit 3 to 0

Reserved

HEX value in volts

BCD value in 100 mV

25/49

Share Link: