DD28F032SA データシートの表示（PDF） - Intel
部品番号
コンポーネント説明
メーカー
DD28F032SA Datasheet PDF : 49 Pages
| |||
E
DD28F032SA
6.5 DC Characteristics (Continued)
VCC = 5.0V ± 0.5V, 5.0V ± 0.25V, TA = 0°C to +70°C
3/5# Pin Set Low for 5.0V Operations
Symbol
Parameter
Notes Min Typ Max Units
Test Conditions
ICCE
ICCES
VCC Block Erase
Current
VCC Erase Suspend
Current
1,7
1,2,6,7
18 25 mA Block Erase in Progress
5
10
mA CE0#, CEX# = VIH
Block Erase Suspended
IPPS
VPP Standby/
1
IPPR
Read Current
IPPD
VPP Deep Power-
1
Down Current
IPPW
VPP Prog. Current
1
for Word or Byte
± 2 ± 20
130 400
0.4 10
7 12
µA VPP ≤ VCC
µA VPP > VCC
µA RP# = GND ± 0.2V
mA VPP = VPPH
Program in Progress
IPPE
VPP Block Erase
1
Current
IPPES
VPP Erase
1
Suspend Current
5
10
130 400
mA VPP = VPPH
Block Erase in Progress
µA VPP = VPPH
Block Erase Suspended
VIL
Input Low Voltage
VIH
Input High Voltage
–0.5
2.0
0.8
V
VCC
V
+ 0.5
VOL
Output Low Voltage
0.45
V VCC = VCC Min, IOL = 5.8 mA
VOH1
VOH2
Output High
Voltage
0.85
VCC
VCC
– 0.4
V VCC = VCC Min, IOH = –2.5 mA
VCC = VCC Min, IOH = –100 µA
VPPL
VPP during Normal
3
0.0
Operations
6.5
V
VPPH
VPP during Prog.
Erase Operations
11.4 12.0 12.6 V
VLKO
VCC Program/Erase
2.0
V
Lock Voltage
NOTES:
1. All currents are in RMS unless otherwise noted. Typical values at VCC = 5.0V, VPP = 12.0V, T = +25°C. These currents are
valid for all product versions (package and speeds).
2. ICCES is specified with the device de-selected. If the device is read while in erase suspend mode, current draw is the sum
of ICCES and ICCR.
3. Block erases, word/byte programs and lock block operations are inhibited when VPP = VPPL and not guaranteed in the
range between VPPH and VPPL.
4. Automatic Power Saving (APS) reduces ICCR to <2 mA in static operation.
5. CMOS Inputs are either VCC ± 0.2V or GND ± 0.2V. TTL Inputs are either VIL or VIH.
6. CEX#= CE1# or CE2#.
7. If operating with TTL levels, add 4 mA of VCC standby current. to max ICCR1, ICCR2, ICCW, ICCE and ICCES.
8. Standby current levels are not reached when putting the chip in standby mode immediately after reading the page buffer.
Default the device into read array or read Status Register mode before entering standby to ensure standby current levels.
27
Share Link: 