DF9B-9S-1V54 データシートの表示（PDF） - HIROSE ELECTRIC

部品番号

コンポーネント説明

メーカー

DF9B-9S-1V54

1mm Pitch SMT Board to Board Connector(Standard Interface Connector Compliant with VESA FPDI-1)

HIROSE ELECTRIC 

sProduct Specifications

Rating

Current rating 0.5A

Operating Temperature Range -45 to +125ç (Note 1) Storage Temperature Range -10 to +60ç (Note 2)

Voltage rating150V AC Operating Humidity Range 40 to 80%

Storage Humidity Range 40 to 70%

Item

specification

Condition

1. Insulation Resistance 500M ohms min.

100V DC

2. Withstanding voltage No flashover or insulation breakdown.

250V AC/1 minute

3. Contact Resistance 50m ohms max.

100mA

4. Vibration

No electrical discontinuity of 1µs or more

Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.

5. Humidity (Steady state) Contact resistance: 50m ohms max. Insulation resistance: 500M ohms min. 96 hours at temperature of 40ç and humidity of 90% to 95%

6. Temperature Cycle Contact resistance: 50m ohms max. Insulation resistance: 500M ohms min. (-55ç: 30 minutes 5 to 35ç: 10 minutes 85ç: 30 minutes 5 to 35ç: 10 minutes) 5 cycles

7. Durability (Mating/un-mating) Contact resistance: 50m ohms max:

Tin plating: 30 cycles

Gold plating: 100 cycles

Reflow: At the recommended temperature profile

8. Resistance to Soldering heat No deformation of components affecting performance.

Manual soldering: 300ç for 3 seconds

Note 1: Includes temperature rise caused by current flow.

Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature

Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during

transportation.

sMaterial

Product

Part

Material

Finish

Insulator

Polyamide

Beige

Receptacle/Header

Contact

Phosphor copper

Tin plated or gold plated

Metal fitting

Brass

Tin plating

Note:The gold plated product contact area is plated with gold, and lead plated with tin-lead.

Remarks

UL94V-0

–––––––

–––––––

s Ordering Information

Please determine the specific product. If needed, please select and order products from the product No. as listed on catalog

page A280~A284.

qReceptacle/Header

DF9 # - * S - 1 V (**)

q

w er

ty

u

q Series Name : DF9

r Connector Type

w Type

Fitting Boss

Blank K K

A

∞

K

BK∞

C∞∞

S: Receptacle

P: Header

t Contact Pitch : 1mm

y Contact Type

V: Straight SMT

u Contact Surface Finish/Packaging Type

e Number of Contacts

(20): Tin plated, tube packaging

9 to 25,31,41,51

(54): Gold plated, tube packaging

(22): Tin plated, embossed tape packaging

(59): Gold plated, embossed tape packaging

*Refer to page A284 for the bottom entry type (DF9L).

A279

Share Link: