DS1345AB-70 データシートの表示（PDF） - Dallas Semiconductor -> Maxim Integrated

部品番号

コンポーネント説明

メーカー

DS1345AB-70

1024k Nonvolatile SRAM with Battery Monitor

Dallas Semiconductor -> Maxim Integrated 

DS1345Y/AB

9. Each DS1345Y has a built-in switch that disconnects the lithium source until VCC is first applied by

the user. The expected tDR is defined as accumulative time in the absence of VCC starting from the

time power is first applied by the user.

10. All AC and DC electrical characteristics are valid over the full operating temperature range. For

commercial products, this range is 0°C to 70°C. For industrial products (IND), this range is -40°C to

+85°C.

11. In a power-down condition the voltage on any pin may not exceed the voltage on VCC.

12. tWR1 and tDH1 are measured from WE going high.

13. tWR2 and tDH2 are measured from CE going high.

14. RST and BW are open-drain outputs and cannot source current. External pullup resistors should be

connected to these pins for proper operation. Both pins will sink 10 mA.

DC TEST CONDITIONS

Outputs Open

Cycle = 200 ns for operating current

All voltages are referenced to ground

AC TEST CONDITIONS

Output Load: 100 pF + 1TTL Gate

Input Pulse Levels: 0 - 3.0V

Timing Measurement Reference Levels

Input: 1.5V

Output: 1.5V

Input pulse Rise and Fall Times: 5 ns

ORDERING INFORMATION

DS1345 TTP - SSS - III

Operating Temperature Range

blank: 0° to 70°

IND: -40° to +85°C

Access Speed

70: 70 ns

100: 100 ns

Package Type

P: 34-pin PowerCap Module

VCC Tolerance

AB: ±5%

Y: ±10%

9 of 12

Share Link: