DS9093N データシートの表示（PDF） - Dallas Semiconductor -> Maxim Integrated

部品番号

コンポーネント説明

メーカー

DS9093N

iButton™ Mount Products

Dallas Semiconductor -> Maxim Integrated 

DS9093x

DESCRIPTION

The DS9093 iButton Mount Products offer the user low-cost fixtures that hold an iButton for thumbpad

applications or permanent attachment to an object.

The DS9093F plastic snap-in fob offers the simplest way to mount an iButton for applications that require

only momentary contact. The fob can be attached to a key ring for carrying. Do not apply solvents or

adhesives to this fob. This might affect the mechanical strength and reliability.

The DS9093N angled fob is an alternate way to mount an iButton for applications that require only

momentary contact. Due to the different mounting technique, the DS9093N can be used with the F5

MicroCan only. The iButton is inserted into this fob by press-fitting. For permanent mount, the iButton

can be locked by a DS9093RA Lock Ring.

The DS9093A is very similar to the DS9093N. It has about the same size as the DS9093N and can be

used with the F5 MicroCan only. The iButton is inserted by press-fitting the flange of the MicroCan into

the cavity of the fob. In contrast to the DS9093N, no additional parts are needed for permanent mounting.

The DS9093A is available in black, blue, green, red and yellow.

THROUGH-MOUNT FOR CONTAINERS

The DS9093S and DS9093P allow the user to permanently attach an iButton to an object with one or two

screws, rivets, etc. The plastic plate is designed with an inset that accommodates the flange of the F5

package and allows for flush mounting. A protective wall is provided along the sides of the plate to

reduce incidental damage to the iButton.

2 of 3

020998

Share Link: