EL6205
Absolute Maximum Ratings (TA = 25°C)
Voltages Applied to:
VDD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.5V to +6.0V
IOUT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.5V to +6.0V
RFREQ, IN . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.5V to +6.0V
Operating Ambient Temperature . . . . . . . . . . . . . . . . . 0°C to +70°C
Maximum Die Operating Temperature . . . . . . . . . . . . . . . . . . +150°C
Storage Temperature Range . . . . . . . . . . . . . . . . . .-65°C to +150°C
Output Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100mAPK-PK
Power Dissipation (max) . . . . . . . . . . . . . . . . . . . . . . . . See Curves
CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the
device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
IMPORTANT NOTE: All parameters having Min/Max specifications are guaranteed. Typical values are for information purposes only. Unless otherwise noted, all tests
are at the specified temperature and are pulsed tests, therefore: TJ = TC = TA
Supply & Reference Voltage Characteristics VDD = +5V, TA = 25°C, RL = 10Ω, RFREQ = 5210Ω (FOSC = 350MHz), IIN = 1mA
(IOUT = 50mAP-P measured at 60MHz), VOUT = 2.2V
PARAMETER
DESCRIPTION
CONDITIONS
MIN TYP MAX UNIT
PSOR
Power Supply Operating Range
4.5
5.5
V
ISO
ISTYP
ISLO
Supply Current Disabled
Supply Current Typical Conditions
Supply Current Low Conditions
IIN ≤ 100µA
RFREQ = 5.21kΩ (includes laser current)
RFREQ = 30.5kΩ, IIN = 300µA (includes laser
current)
550 750
µA
25
32
38
mA
10
mA
ISHI
Supply Current High Conditions
RFREQ = 3.05kΩ, IIN = 2mA (includes laser current)
53
mA
VFREQ
Voltage at RFREQ Pin
1.27
V
RIN
Input Impedance
500
Ω
Oscillator Characteristics
VDD = +5V, TA = 25°C, RL = 10Ω, RFREQ = 5210Ω (FOSC = 350MHz), IIN = 1mA (IOUT = 50mAP-P
measured at 60MHz), VOUT = 2.2V
PARAMETER
DESCRIPTION
CONDITIONS
MIN
TYP
MAX
UNIT
FOSC
FHIGH
FLOW
TCOSC
PSRROSC
Frequency Tolerance
Unit-unit frequency variation
Frequency Range High
RFREQ = 3.05kΩ
Frequency Range Low
RFREQ = 30.5kΩ
Frequency Temperature Sensitivity 0°C to 70°C ambient
Frequency Change ∆F/F
VDD from 4.5V to 5.5V
300
350
400
MHz
600
MHz
60
MHz
50
ppm/°C
1
%
Driver Characteristics
VDD = +5V, TA = 25°C, RL = 10Ω, RFREQ = 30.5kΩ (FOSC = 60MHz), IIN = 1mA (IOUT = 50mAP-P
measured at 60MHz), VOUT = 2.2V
PARAMETER
DESCRIPTION
CONDITIONS
MIN
TYP
MAX UNIT
AMPHIGH
AMPLOW
IAVG
IOUTP-P
Duty Cycle
PSRRAMP
TON
TOFF
INOUT
Amplitude Range High
Amplitude Range Low
Average Output Current @ 2.2V
Output Current Tolerance
IIN = 2mA
IIN = 300µA
RFREQ = 5210Ω
Defined as one standard deviation
Output Push Time/Cycle Time
Amplitude Change of Output ∆I/I
Auto Turn-on Time
RFREQ = 5210Ω
VDD from 4.5V to 5.5V
Input current step from 0mA to 1mA
Auto Turn-off Time
Input current step from 1mA to 0mA
IOUT Current Output Noise Density RFREQ = 5490Ω, FMEASURE = 10MHz
100
mAP-P
15
mAP-P
20
mA
2
%
43
%
-54
dB
15
us
0.5
us
2.5
nA/√Hz
2