ELJ-650-637 データシートの表示（PDF） - EPIGAP optoelectronic GmbH
部品番号
コンポーネント説明
メーカー
ELJ-650-637 Datasheet PDF : 5 Pages
| |||
Jumbo-LED
ELJ-650-637
14.01.2008
rev. 01
Remarks concerning optical radiation safety*
Up to nominal forward current (<700mA) and continuous operation, this LED may be classified as
LED product Class 2 , according to standard IEC 60825-1:A2. Class 2 products emit in the visible
region, damaging exposure is usually prevented through avert reactions including blink reflex. It can
be expected that these reactions provide sufficient protection under reasonably predictable
conditions. This also implicates a direct observation of the light beam by means of optical
instruments.
*Note: Safety classification of an optical component mainly depends on the intended application and
the way the component is being used. Furthermore, all statements made to classification are based
on calculations and are only valid for this LED "as it is", and at continuous operation. Using pulsed
current or altering the light beam with additional optics may lead to different safety classifications.
Therefore these remarks should be taken as recommendation and guideline only.
VISIBLE RADIATION
Do not stare into the beam
LED Class 2
accord. DIN EN/IEC 60825-1:2001-11
We reserve the right to make changes to improve technical design and may do so without further notice.
Parameters can vary in different applications.All operating parameters must be validated for each customer application by the customer.
EPIGAP Optoelektronik GmbH, D-12555 Berlin, Köpenicker Str.325 b, Haus 201
Tel.: +49-30-6576 2543, Fax : +49-30-6576 2545
4 of 5
Share Link: 