EM91450 データシートの表示（PDF） - ELAN Microelectronics

部品番号

コンポーネント説明

メーカー

EM91450

TONE/PULSE DIALER WITH LCD INTERFACE AND I.P.P. DETECT FUNCTION

ELAN Microelectronics 

EM91450 SERIES

TONE/PULSE DIALER WITH LCD INTERFACE

AND I.P.P. DETECT FUNCTION

Redialing:

After normal dialing, directly keying F key (or On-Off hook once) and keying RD key on keyboard. The

numbers that are stored into LNB memory will be dialed output.

Pause (P) key operation

The Pause (P) key is designed to support pause operation in dialing duration. "P" key can be stored in memory

and it will occupy one digital position.

• To select Pulse or Tone mode.

• Off-hook (or turn on HF function), push (d1, d2, .. , dn, RD/P, k1, k2, .. , kn.) These numbers will be dialed

out as following sequence:

d1, d2, .. , dn, Tp, k1, k2, .. , kn.

Pulse to Tone (*/T) key operation

The Pulse to Tone (*/T) key is designed to support toll dialing (long distance call) or PABX system operation.

The "*/T" key can be stored in memory and it will occupy one digital position.

• To select Pulse mode.

• Off-hook (or turn on HF function), push d1, d2, .. , dn, */T, k1, k2, .. , kn. These numbers will be dialed out

as following sequence:

d1, d2, .. , dn, Tpt, k1, k2, .. , kn.

(pulse mode)

(tone mode)

Flash (F) key operation

The Flash (F) key is designed to break telephone line temporarily. After F key is depressed, this dialer will send

a flash signal to break line 600 ms, 300 ms, 100 ms or 80 ms as ROW3 and ROW4 selection.

Handfree (HF) function

The handfree function is designed to support on-hook dialing and loudspeaker application which can be turn "on"

or "off" with falling edge signal from HFI pin. During handfree function is executed, the HFO pin is switched

to "high". Otherwise the HFO pin stays "low" level. One of the following operations can turn off Handfree

function (HFO pin return to "Low").

• On-off hook once.

• Trigger HFI pin with falling edge signal.

• Turn on Hold (HD) function. (HDO pin switched to "High")

Hold (HD) function

The Hold function is designed to stop conversation temporarily. In off-hook state (or HF function is turned on),

to press HD key on the keyboard, the Hold function can be turned "on" (HDO pin switched to "High"). One of

the following operations can turn off Hold function (HDO pin switched to "Low").

• On-off hook once.

• To press HD key over 93 ms.

* This specification are subject to be changed without notice.

2.10.1999 6

Share Link: