EPCS128SI16N データシートの表示（PDF） - Altera Corporation

部品番号

コンポーネント説明

メーカー

EPCS128SI16N

Serial Configuration Devices

Altera Corporation 

3–6

　　　　

Chapter 3: Serial Configuration Devices (EPCS1, EPCS4, EPCS16, EPCS64, and EPCS128) Data Sheet

Active Serial FPGA Configuration

Multiple devices can be configured by a single EPCS device. However, serial

configuration devices cannot be cascaded. Refer to Table 3–1 to ensure the

programming file size of the cascaded FPGAs does not exceed the capacity of a serial

configuration device. Figure 3–4 shows the AS configuration scheme with multiple

FPGAs in the chain. The first FPGA is the configuration master and has its MSEL[]

pins set to AS mode. The following FPGAs are configuration slave devices and have

their MSEL[] pins set to PS mode.

Figure 3–4. Multiple Devices in AS Mode (Note 1), (5)

VCC (1)

VCC (1)

VCC (1)

10 k

10 k

10 k

Serial

Configuration

Device (2)

DATA

DCLK

nCS

ASDI

Altera FPGA (Master)

CONF_DONE

nSTATUS

nCONFIG

nCE

DATA0

DCLK

nCSO

ASDO

nCEO

MSEL[]

(3)

Altera FPGA (Slave)

CONF_DONE

nSTATUS

nCONFIG

nCE

DATA0

DCLK

nCEO

N.C.

MSEL[ ]

(4)

Notes to Figure 3–4:

(1) For the VCC value, refer to the respective FPGA family handbook Configuration chapter.

(2) Serial configuration devices cannot be cascaded.

(3) Connect the FPGA MSEL[] input pins to select the AS configuration mode. For details, refer to the appropriate FPGA family chapter in the

Configuration Handbook.

(4) Connect the FPGA MSEL[] input pins to select the PS configuration mode. For details, refer to the appropriate FPGA family chapter in the

Configuration Handbook.

(5) For more information about configuration pin I/O requirements in an AS scheme for an Altera FPGA, refer to the respective FPGA family handbook

Configuration chapter.

Configuration Handbook (Complete Two-Volume Set)

© December 2009 Altera Corporation

Share Link: