DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

FAN7093 データシートの表示(PDF) - Fairchild Semiconductor

部品番号
コンポーネント説明
メーカー
FAN7093
Fairchild
Fairchild Semiconductor Fairchild
FAN7093 Datasheet PDF : 14 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
Electrical Characteristics
Unless otherwise specified, VBATT = 7 V to 18 V, TJ = -40°C to +150°C, IL = 0 A, all voltages with respect to ground,
and positive current flowing into pin.
Symbol
Parameter
IVBATT(ON) Supply Current
IVBATT(OFF) Quiescent Current
Condition
VINH=5 V, VIN=5 V, RSR=0 Ω,
DC-Mode, No Fault Condition
VINH=0 V, VIN=0 V
Min.
Typ.
Max.
5.0
450
Unit
mA
µA
Power Stage Characteristics
The power stages of the FAN7093 consist of a P-channel vertical DMOS transistor for the high-side switch and an N-
channel vertical DMOS transistor for the low-side switch. All protection and diagnostic functions are located in the
control die. Both switches can be operated up to 60 kHz2, allowing active freewheeling and minimizing power
dissipation in the forward operation of the integrated diodes.
The on-state resistance, RDS(ON), is dependent on the supply voltage VBATT as well as on the junction temperature, TJ.
Power Stages Static Characteristics
Unless otherwise specified, VBATT=7 V to 18 V, TJ=-40°C to +150°C, all voltages with respect to ground, and positive
current flowing into pin.
Symbol
Parameter
Condition
Min. Typ. Max.
High-Side Switch
RDS(ON)_HS On-State High-Side Resistance
IOUT=-20 A; VBATT=14 V(8)
12.3
ILEAK(HS) Leakage Current
VINH=0 V, VOUT=0 V
50
VRDF Reverse Diode Forward-Voltage(9)
IOUT=-9 A
1.5
Low-Side Switch
RDS(ON)_LS On-State Low-Side Resistance
IOUT=20 A; VBATT=14 V(8)
18.2
ILeak(LS) Leakage Current
VINH=0 V, VOUT=VBATT
10
Reverse Diode Forward-Voltage(9)
IOUT=9 A
-1.5
Notes:
8. Specified RDS(ON) value is related to normal soldering points; RDS(ON) values are specified for
FAN7093_F085: pin 1,7 to pin 8 (tab, backside).
9. Due to active freewheeling, the diode is conducting only for a few µs, depending on the value of the
external RSR resistor.
Unit
µA
V
µA
V
2 The minimum duty cycle is 34% when VBATT=14 V, RSR is shorted and the following parameters are at their typical values:
td(ON)HS, td(ON)LS, tSlew(on)HS, and tSlew(on)LS.
© 2010 Fairchild Semiconductor Corporation
FAN7093 Rev. 1.0.6
5
www.fairchildsemi.com

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]