FAN7621 データシートの表示（PDF） - Fairchild Semiconductor
部品番号
コンポーネント説明
メーカー
FAN7621 Datasheet PDF : 17 Pages
| |||
Pin Configuration
(1) HVCC
(2) CTR
(3) HO
(4) NC
(5) NC
(6) CON
(7) NC
(8) RT
FAN7621
PG (16)
NC (15)
LO (14)
NC (13)
LVCC (12)
NC (11)
SG (10)
CS (9)
Figure 3. Package Diagram
Pin Definitions
Pin #
1
2
3
4
5
Name
HVCC
CTR
HO
NC
NC
6
CON
7
NC
8
RT
9
CS
10
SG
11
NC
12
LVCC
13
NC
14
LO
15
NC
16
PG
Description
This is the supply voltage of the high-side gate-drive circuit IC.
This is the drain of the low-side MOSFET. Typically, a transformer is connected to this pin.
This is the high-side gate driving signal.
No connection.
No connection.
This pin is for a protection and enabling/disabling the controller. When the voltage of this pin
is above 0.6V, the IC operation is enabled. When the voltage of this pin drops below 0.4V,
gate drive signals for both MOSFETs are disabled. When the voltage of this pin increases
above 5V, protection is triggered.
No connection.
This pin programs the switching frequency. Typically, an opto-coupler is connected to
control the switching frequency for the output voltage regulation.
This pin senses the current flowing through the low-side MOSFET. Typically, negative
voltage is applied on this pin.
This pin is the control ground.
No connection.
This pin is the supply voltage of the control IC.
No connection.
This is the low-side gate driving signal.
No connection.
This pin is the power ground. This pin is connected to the source of the low-side MOSFET.
© 2009 Fairchild Semiconductor Corporation
FAN7621 • Rev. 1.0.1
3
www.fairchildsemi.com
Share Link: 