FAR Family (C4 series G type)
s STANDARD FREQUENCY
Standard frequency (KHz)
8,000
10,000
11,000
11,059
12,000
16,000
Package size
G
G
Resonant resistance
100 Ω max. (Symbol: 5)
75 Ω max. (Symbol: 2)
Note: • For oscillation frequency (in 8 to 16 MHz) other than standard, Fujitsu can also develop applicable part.
• Resonant resistance of the part is specified according to applied frequency as above.
s NOTES ON USE
• Handle carefully
• Solder under the following conditions.
5 seconds max. at 230°C (PCB)
Do not apply extreme heat to the resonator. Recommended preheating is 150°C for one minute.
• Avoid extreme fluctuations in temperature during use.
• There is no specific direction in resonator mounting.
• Oscillation data should be examined when used in oscillation circuit with micon or other ICs.
• This is for reflow solder, not for flow solder.
3