FAR-C4CN-12000-L20-R データシートの表示（PDF） - Fujitsu

部品番号

コンポーネント説明

メーカー

FAR-C4CN-12000-L20-R

Piezoelectric Resonator (4 to 23.9 MHz)

Fujitsu 

FAR Family (C4 series N type)

s STANDARD FREQUENCY

Standard frequency (kHz)

4,000

4,194

4,915

6,000

6,144

7,373

8,000

8,388

9,830

10,000

11,059

12,000

12,288

14,746

16,000

16,934

19,661

20,000

Package size

N

N

Resonant resistance

300 Ω max.

(Symbol: 0)

75 Ω max.

(Symbol: 2)

Notes: • Fujitsu can also develop applicable device in addition to standard devices if it’s oscillation frequency is

from 4 to 23.9 MHz.

• Resonant resistance of the part other than standard, Fujitsu should specify its resonant resistance

according to applied frequency. (See “• Frequency and standard resonant resistance.”)

• Frequency and standard resonant resistance

Frequency

4.00 to 5.99 MHz

6.00 to 23.99 MHz

Standard resonant resistance

300 Ω max. (Symbol: 0)

75 Ω max. (Symbol: 2)

Note: Resonant resistance of custom designed part should be specified considering matching condition with

applicable IC by Fujitsu.

s NOTES ON USE

• Handle carefully

• Solder under the following conditions.

5 seconds max. at 230°C (PCB)

Recommended preheating is 150°C for one minute in order not to apply extreme heat to the resonator.

• Avoid extreme fluctuations in temperature.

• There is no specific direction in resonator mounting.

• Oscillation data should be examined when used in oscillation circuit with micon or other ICs.

• This is for reflow solder, not for flow solder.

3

Share Link: