FH26 データシートの表示（PDF） - HIROSE ELECTRIC

部品番号

コンポーネント説明

メーカー

FH26

0.3mm Contact Pitch, 1mm above the board, Flexible Printed Circuit ZIF Connectors

HIROSE ELECTRIC 

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

FH26 SeriesG0.3mm Contact Pitch, 1mm above the board, Flexible Printed Circuit ZIF Connectors

Precautions

3 The actuator will rotate 135 degrees

135˚

maximum. Do not apply force to rotate

further. (1N max.)

4 When operating the actuator, do so at the

center portion.

5 As illustrated, do not attempt removal or re-

positioning of the actuator.

SFPC Insertionq

The FPC should be aligned parallel with the board surface and perpendicular with the connector (as

shown), then completely inserted.

Perpendicular with

the connector

To assure correct electrical and mechanical connection do not insert FPC at angle. It must be fully inserted.

Make sure that the FPC is NOT MOVED during the closing of the actuator.

10

Share Link: