FH26-15S-0.3SHW データシートの表示（PDF） - HIROSE ELECTRIC

部品番号

コンポーネント説明

メーカー

FH26-15S-0.3SHW

0.3mm Contact Pitch, 1mm above the board, Flexible Printed Circuit ZIF Connectors

HIROSE ELECTRIC 

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

FH26 SeriesG0.3mm Contact Pitch, 1mm above the board, Flexible Printed Circuit ZIF Connectors

Precautions

SFPC Insertionw

Do not insert the FPC at any angle from above.

As illustrated, angle insertion may cause electrical discontinuity when the FPC is deflected in use.

*To avert insertion of the FPC on an angle, consideration should be given to securing FPC insertion space

at the time of board layout. Insertion will be difficult when the FPC is too short.

*Contact the FPC manufacturer for information about the bending specifications.

SVerification of the fully closed actuator.

The actuator should be fully closed (as illustrated) and the FPC held firmly in the connector.

Do not press against the actuator when is fully closed. Max force applied to the fully closed actuator should

not exceed 1 N.

Routing the FPC (FPC fully inserted/ actuator closed)

SFPC Load

Do not apply force in excess of 0.05N/pin max. in the upward direction (as illustrated). Do not bend the

FPC too close to the actuator.

Load: 0.05N/pin max.

11

Share Link: