A5800683 データシートの表示（PDF） - ROHM Semiconductor

部品番号

コンポーネント説明

メーカー

A5800683

4-channel BTL driver for CD players

ROHM Semiconductor 

Optical disc ICs

FOperation notes

(1) Muting and resetting

BA6197FP

(2) The circuit is muted during thermal shutdown and

during the mute-on state. In each case, only the drivers

are muted. During muting, the output pins remain at the

internal bias voltage, roughly (VCC-VF) / 2.

(3) When using an attached resistor to change the

gain, the temperature characteristics of the internal feed-

back resistors results in temperature variation in the gain

(relative to the typical value) of )4600ppm per degree.

There is virtually no temperature variation in error due to

resistance variation.

(4) Be sure to connect the IC to a 0.1µF bypass capaci-

tor to the power supply, at the base of the IC.

(5) The radiating fin is connected to the packages inter-

nal GND, but should also be connected to an external

ground.

(6) The capacitor between regulator output (pin 6) and

GND also serves to prevent oscillation of the IC, so select

one with good temperature characteristics.

(7) Pins 5 and 6 may be left open when the regulator

is not used.

(8) Pins 14, 15 and 16 may be left open when the op-

erational amplifier is not used.

FElectrical characteristic curves

306

Share Link: