FX-101-DFC-A1P2(2006) データシートの表示（PDF） - Vectron International
部品番号
コンポーネント説明
メーカー
FX-101-DFC-A1P2 Datasheet PDF : 7 Pages
| |||
Reflow Profile (IPC/JEDEC J-STD-020C)
Parameter
Symbol
PreHeat Time
Ramp Up
Time Above 217 oC
Time To Peak Temperature
Time At 260 oC
Ramp Down
tS
R UP
tL
t AMB-P
tP
R DN
Value
60 sec Min, 180 sec Max
3 oC/sec Max
60 sec Min, 150 sec Max
480 sec Max
20 sec Min, 40 sec Max
6 oC/sec Max
The FX-101 is being qualified to meet the
JEDEC standard for Pb-Free assembly. The
260
temperatures and time intervals listed are
based on the Pb-Free small body
217
requirements. The temperatures refer to the
200
topside of the package, measured on the
package body surface. The FX-101 should not
be subjected to a wash process that will
150
immerse it in solvents. NO CLEAN is the
recommended procedure. The FX-101 has
been designed for pick and place reflow
soldering. The FX-101 may be reflowed once
and should not be reflowed in the inverted
position.
25
R
tS
t AMB-P
Time (sec)
tL
tP
R DN
Vectron International, 267 Lowell Road, Hudson, NH 03051
Page 4 of 7
Tel: 1-88-VECTRON-1 • Web: www.vectron.com
Rev: 10Nov06
Share Link: 