G150X1-L01 データシートの表示（PDF） - AZ Displays

部品番号

コンポーネント説明

メーカー

G150X1-L01

TFT LCD Approval Specification

AZ Displays 

Doc No.: 14066727

Issued Date: Feb. 8, 2007

Model No.: G150X1-L01

Approval

2. ABSOLUTE MAXIMUM RATINGS

2.1 ABSOLUTE RATINGS OF ENVIRONMENT

Item

Storage Temperature

Operating Ambient Temperature

Symbol

TST

TOP

Value

Min.

Max.

-40

80

-30

70

Unit

Note

ºC

(0), (1)

ºC (0), (1), (2)

Test Item

High Temperature Storage Test

Low Temperature Storage Test

Thermal Shock Storage Test

High Temperature Operation Test

Low Temperature Operation Test

High Temperature & High Humidity

Operation Test

Heat Cycle Operation Test

ESD Test (Operation)

Shock (Non-Operating)

Vibration (Non-Operating)

Test Condition

80ºC, 240 hours

-40ºC, 240 hours

-40ºC, 0.5hour←→80℃, 0.5hour; 100cycles, 1hour/cycle

70ºC, 240 hours

-30ºC, 240 hours

Note

(1), (2)

60ºC, RH 90%, 240hours

-30ºC, 1hour←→70ºC, 1hour; 50cycles, 4hour/cycle

150pF, 330Ω, 1sec/cycle

Condition 1 : panel contact, ±8KV

Condition 2 : panel non-contact ±15KV

50G, 11ms, half sine wave, 1 time for ± X, ± Y, ± Z direction

1.5G, 10 ~ 500 Hz sine wave, 1.5mm Max, 30min/cycle, 1

cycles each X, Y, Z direction

(2)

(2), (3)

(2), (3)

Note (0) All test conditions are as above table.

Note (1) Temperature and relative humidity range is shown in the figure below.

(a) 90 %RH Max. (Ta ≤ 40 ºC).

(b) Wet-bulb temperature should be 39 ºC Max. (Ta > 40 ºC).

(c) No condensation of water.

Note (2) No display malfunctions.

Note (3) At testing Vibration and Shock, the fixture in holding the module has to be hard and rigid enough

so that the module would not be twisted or bent by the fixture.

Note (4) Temperature of panel display surface area should be 80 ºC Max.

6 / 27

Version 2.2

Share Link: