G5V-2DC3 データシートの表示（PDF） - OMRON Corporation

部品番号

コンポーネント説明

メーカー

G5V-2DC3

Low Signal Relay

OMRON Corporation 

Dimensions

Note: 1. All units are in millimeters unless otherwise indicated.

2. Tolerance: ±0.1

3. Orientation marks are indicated as follows:

G5V-2, G5V-2-H1

20.5 max.

20.3 typ.

10.1 max.

9.9 typ.

Terminal Arrangement/

Internal Connections

(Bottom View)

1

8

46

(1.3)

13 11

16

9

Mounting Holes

(Bottom View)

Tolerance: ±0.1

7.62 5.08 5.08

(1.2)

7.62

11.5 max.

11.4 typ.

0.5

Eight, 1-dia. holes

(1.3)

0.5

0.3

7.62

3.5

■ Approvals

UL Recognized (File No. E41515) / CSA Certified (File No. LR31928) - - Ambient Temp. = 40°C

Type

G5V-2

G5V-2-H1

Contact form

DPDT

Coil rating

3 to 48 VDC

3 to 48 VDC

Contact ratings

0.6 A at 125 VAC (General Use)

0.6 A at 110 VDC (Resistive)

2 A at 30 VDC (Resistive)

0.5 A at 125 VAC (General Use)

0.2 A at 110 VDC (Resistive)

1 A at 24 VDC (Resistive)

Note: 1. The rated values approved by each of the safety standards may be different from the performance characteristics individually defined in this catalog.

2. In the interest of product improvement, specifications are subject to change.

Precautions

Long-term Continuously ON Contacts

Using the Relay in a circuit where the Relay will be ON continuously

for long periods (without switching) can lead to unstable contacts

because the heat generated by the coil itself will affect the insulation,

causing a film to develop on the contact surfaces. Be sure to use a

fail-safe circuit design that provides protection against contact failure

or coil burnout.

Relay Handling

When washing the product after soldering the Relay to a PCB, use a

water-based solvent or alcohol-based solvent, and keep the solvent

temperature to less than 40°C. Do not put the Relay in a cold clean-

ing bath immediately after soldering.

66

Low Signal Relay G5V-2

Share Link: