GL824 データシートの表示（PDF） - GENESYS LOGIC

部品番号

コンポーネント説明

メーカー

GL824

USB 2.0 On-The-Go Controller

GENESYS LOGIC 

GL824/GL824C USB 2.0 On-The-Go Controller

• xD-Picture Interface (GL824 only)

- xD-Picture specification v1.2B

- xD-Picture Type M card support

• SmartMediaTM interface ( GL824 only )

- 8 bit data width and different speed

- Support different page size, and automatic append redundant area data (8 / 16 bytes)

• MemoryStickTM / MemoryStick Pro interface

- Compliant with MemoryStick interface specification

- Support INS signal

- Support automatic CRC16 generation and verification

• Secure DigitalTM and MultiMediaCardTM

- Compliant with Secure Digital / MMC interface specification

- Supports both SD / MMC mode access CLK/CMD/DAT0/DAT1/DAT2/DAT3/DAT4/DAT5/DAT6/DAT7

- Supports SD specification v1.0 / v1.1

- Supports MMC specification v4.0 / v4.1 x1 / x4 / x8 data transmission

- Automatic CRC7 generation for command and CRC7 verification for response on CMD

- Support automatic CRC16 generation and verification on DAT0:7

- In addition to full packet transaction, optional single byte / bit operation on both CMD and DAT line / lines

- Process data in block or byte

• High efficient hardware engine

- Automatic data read / write with card by hardware engine

- Easier firmware development

• On board 24Mhz Crystal driver circuit

• Available in 208-pin LQFP 24x24 mm package, support all card interface with external Flash/Serial

Interface for MP3 Decoder/2Pins Serial Interface LCD panel/ATA(ATAPI)/SDRAM(Host Interface)

( GL824 )

• Available in 128-pin LQFP 14x14 mm package, Support SD/MMC/MS/MSPro card interface/Serial

Interface for MP3 Dcecoder (Only support Serial Data/Control interface in the same

pins)/ATA(ATAPI)/SDRAM(Host Interface) ( GL824C )

©2000-2006 Genesys Logic Inc. - All rights reserved.

Page 11

Share Link: