UPD16310GF-3L9 データシートの表示（PDF） - NEC => Renesas Technology

部品番号

コンポーネント説明

メーカー

UPD16310GF-3L9

HIGH VOLTAGE CMOS DRIVER FOR PDP, EL, VFD

NEC => Renesas Technology 

µPD16310

RECOMMENDED SOLDERING CONDITIONS

The following conditions (see table below) must be met when soldering this product. Please consult with our sales

offices in case other soldering process is used, or in case soldering is done under different conditions.

µPD16310GF-3L9

Soldering process

Infrared ray reflow

VPS

Partial heating method

Soldering conditions

Peak package’s surface temperature: 230 °C or below,

Reflow time: 30 seconds or below (210 °C or higher),

Number of reflow process: 1, Exposure limit*: None

Peak package’s surface temperature: 215 °C or below,

Reflow time: 40 seconds or below (200 °C or higher),

Number of reflow process: 1, Exposure limit*: None

Terminal temperature: 300 °C or below,

Flow time: 10 seconds or below,

Exposure limit*: None

Symbol

IR30-00-1

VP15-00-1

* Exposure limit before soldering after dry-pack package is opened.

Storage coditions: 25 °C and relative humidity at 65 % or less.

Note Do not apply more than a single process at once, except for “Partial heating method.”

11

Share Link: