HDSP-560X(2010) データシートの表示（PDF） - Avago Technologies
部品番号
コンポーネント説明
メーカー
HDSP-560X Datasheet PDF : 10 Pages
| |||
Yellow
Device
Series
HDSP-
Parameter
Luminous Intensity/Segment[1,2]
(Digit Average)
57XX
Forward Voltage/Segment or DP
Peak Wavelength
Dominant Wavelength[3,7]
Reverse Voltage/Segment or DP[4]
Temperature Coefficient of
V /Segment or DP
F
Thermal Resistance LED Junction-
to-Pin
Symbol
IV
V
F
OPEAK
Od
V
R
ΔV /°C
F
RTJ-Pin
Min.
600
581.5
3.0
Typ. Max.
1800
2750
2.1 2.5
583
586 592.5
40
-2
Units Test Conditions
I = 10 mA
F
μcd
I = 60 mA Peak:
F
1 of 6 df
V I = 20 mA
F
nm
nm
V I = 100 μA
R
mV/°C
345
°C/W/
Seg
High Performance Green
Device
Series
HDSP-
Parameter
Luminous Intensity/Segment[1,2]
(Digit Average)`
56XX
Forward Voltage/Segment or DP
Peak Wavelength
Dominant Wavelength[3,7]
Reverse Voltage/Segment or DP[4]
Temperature Coefficient of
V /Segment or DP
F
Thermal Resistance LED Junction-
to-Pin
Symbol
IV
V
F
OPEAK
Od
V
R
ΔV /°C
F
RTJ-Pin
Min. Typ. Max. Units Test Conditions
900 2500
3100
I = 10 mA
F
μcd
I = 60 mA Peak:
F
1 of 6 df
2.1 2.5
V I = 10 mA
F
566
nm
571 577 nm
3.0 50
-2
V I = 100 μA
R
mV/°C
345
°C/W/
Seg
Notes:
1. Device case temperature is 25°C prior to the intensity measurement.
2. The digits are categorized for luminous intensity. The intensity category is designated by a letter on the side of the package.
3. The dominant wavelength, Od, is derived from the CIE chromaticity diagram and is that single wavelength which defines the color of the device.
4. Typical specification for reference only. Do not exceed absolute maximum ratings.
5. For low current operation, the AlGaAs HDSP-H10X series displays are recommended. They are tested at 1 mA dc/segment and are pin for pin
compatible with the HDSP-H15X series.
6. For low current operation, the HER HDSP-555X series displays are recommended. They are tested at 2 mA dc/segment and are pin for pin com-
patible with the HDSP-550X series.
7. The Yellow (HDSP-5700) and Green (HDSP-5600) displays are categorized for dominant wavelength. The category is designated by a number
adjacent to the luminous intensity category letter.
7
Share Link: 