HMC154S8 データシートの表示（PDF） - Hittite Microwave
部品番号
コンポーネント説明
メーカー
HMC154S8 Datasheet PDF : 6 Pages
| |||
v02.0805
Typical Application Circuit
HMC154S8 / 154S8E
GaAs MMIC SMT LOW DISTORTION
T/R SWITCH, DC - 2.5 GHz
14
Notes:
1. Set logic gate and switch Vdd = +3V to +5V and use HCT series logic to provide a TTL driver interface.
2. Control inputs A/B can be driven directly with CMOS logic (HC) with Vdd of 3 to 8 Volts applied to the CMOS
logic gates and to pin 4 of the RF switch.
3. DC Blocking capacitors are required for each RF port as shown. Capacitor value determines lowest frequency
of operation.
4. Highest RF signal power capability is achieved with V set to +10V. The switch will operate properly (but at lower
RF power capability) at bias voltages down to +3V.
14 - 6
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
Share Link: 